Now, friend, them tankless water heaters, bless their hearts, are also known as demand-type or instantaneous water heaters. They’re quite the clever contraptions, as they only warm up water when you require it. Ain’t that a bargain! Unlike them storage water heaters, these beautiful gems don’t squander no energy on standby losses. So, if you’re lookin’ to save a few bucks, you’ve come to the perfect place.
Now, let’s dig deep into the details of how these little marvels operate. Imagine this: you turn on a hot water faucet, and voilà! Cold water starts running through a fancy heat exchanger inside the tankless water heater. Then, either a natural gas burner or an electric element jumps into action and warms up that water like a champ. And presto! You got yourself a continuous supply of piping hot water, without havin’ to wait for no tank to fill up. But, bear in mind, these tankless wonders do have a restriction on how much water they can deliver at once. So, keep that in mind.
Usually, these tankless water heaters provide ya hot water at a rate of ’round 2 to 5 gallons (that’s ’bout 7.6 to 15.2 liters) per minute. The gas-fired ones, they’re a bit more abundant with their flow rates compared to the electric ones. But, now and then, even the mightiest gas-fired model might have trouble to keep up with multiple hot water demands in larger households. Picture this situation: you’re taking a shower while simultaneously running the dishwasher. Well, that could push your tankless water heater to its limits, my buddy. But fret not, for I have a fix for ya! You can install not one, but two or more tankless water heaters if ya require ’em. Another option is to dedicate separate tankless water heaters to power-hungry appliances like washers or dishwashers. Just remember, these extra heaters might cost ya a pretty penny, so weigh the pros and cons before taking the plunge.
Tankless water heater installation
Now, let’s venture into the wide range of applications for these demand water heaters. They can work miracles in remote bathrooms or hot tubs, act as boosters for appliances like dishwashers or clothes washers, or lend a helping hand to a solar water heating system. Ain’t they versatile little gems?
But hold your horses, friend, ’cause we gotta talk about the benefits and drawbacks of these tankless water heaters. For homes that use 41 gallons of heated water or less each day, these demand water heaters can be ’round 24% to 34% more energy-efficient compared to them traditional storage tank water heaters. And if you’re a heavy hot water user, ’round 86 gallons per day, you can still experience energy savings of ’bout 8% to 14%. In some cases, if you install a demand water heater at each hot water outlet, you might even achieve even greater energy savings. Now, I reckon the upfront cost of these tankless wonders is higher than them conventional storage water heaters. But fear not! They tend to last longer and have lower operating and energy costs, which might just offset that higher purchase price. Most tankless water heaters can operate for more than 20 years, and you can easily replace their parts to extend their lifespan even further. Compare that to storage water heaters, which usually call it quits after ’bout 10 to 15 years.
One thing you gotta keep in mind, though, is that while tankless water heaters dodge them standby heat losses that plague their storage cousins, gas-fired ones can be a bit naughty when it comes to wasting energy if they have a pilot light. It can kinda cancel out that standby energy loss elimination when compared to a storage water heater. See, in a gas-fired storage water heater, the pilot light does the noble duty of heating up the water in the tank, so no energy goes to waste. But don’t fret just yet! The cost of running a pilot light in a tankless water heater varies from model to model. So, I’d reckon you take a gander at the manufacturer’s literature to find out how much gas that pilot light of yours would be using’ up. And here’s a nifty tip: look for them models with an intermittent ignition device (that’s IID for short). It’s like them spark ignition devices ya find in natural gas furnaces and kitchen ranges and ovens. That way, you can bid adieu to them wasteful pilot lights.
Now, when it comes to pickin’ the right demand water heater for your home, there are a few factors to consider. First off, size matters, my buddy. Make sure you choose a size that fits your needs like a glove. Then there’s the fuel type and availability to think about. Next up, energy efficiency. We measure that with somethin’ called the energy factor. Take a gander at that number when deciding. And, of course, cost is always a key player. Don’t forget to take installation and maintenance into account too. Proper installation is a mighty important step, dependin’ on factors like fuel type, climate, local building codes, and safety concerns ’bout gas-fired water heaters. My recommendation? Get yourself a qualified plumbing and heating contractor to handle the installation.
For Tankless water heater installation in Bethlehem 18016, you can count on Lehigh Valley Plumbing Experts.
Leave A Comment